KALLER PRODUCTS
Gas springs, Mounts, Flex Cam, Controller Gas Spring, Roller Cam, Stock Lifter and Flange Stripper, Soft Hit Striker Plate
Learn More
TON / Standard
Punches, Button Dies, Pilots, Retainers, Wear Plates, Guide bush, Guide post, Unit cam, Springs, etc Standard Parts
Learn more
TON / Punches
Punches, Button Dies
Pilots,
Retainers
Learn more
About Us

Phone 82-31-319-6575
Fax 82-31-319-6577

Learn more

KALLER Products

Gas Spring & Standard Mounts

Gas Spring & Standard Mounts

Gas Spring – TU, TL, X, TX, XG, CU, M2, EP3 etc.        Mount – FFC, FCS, FC, MP, S, FCR etc.

Special Mounts

Special Mounts

K, L, HM, HMF, SA, FAC, SW, RM/RMX, FCSC, FC, FSL, FSS, NMP, FFL, FRM Special Mounts

Gas Links System

Gas Links System

Connecting one or more gas springs to form a Link System with a common gas pressure may often be advantageous from a press technique and/or safety perspective.

Flex Cam

Flex Cam

Flex Cam is used for piercing, cutting, forming and flanging operations. The system allows for a flexible distribution of forces with optimal direction and velocity. By using a Flex Cam, fewer tools are required in production.

Controllable Gas Springs-KF2

Controllable Gas Springs-KF2

Controllable Gas Spring – KF2 (patented product) can be locked in their bottom position and where the return stroke of the spring can be controlled.

Flange Stripper - LT, LW, LTP, LWP, SLMTS

Flange stripper LT, LW

KALLER Flange Stripper Unit (or lifter) is to be used in flanging dies, for lifting up the part after flanging operations.

Roller Cam

Roller Cam RC2, RCP2

Roller Cam is used for piercing, trimming, flanging and restriking. The Roller Cam can be mounted in both vertical and horizontal angles.

Hose less Baseplate

Hose less Baseplate

KALLER Hose-less Baseplate is the increasingly popular easy-accessible alternative to the conventional hosed plate systems on the market.

DS Gas spring

DS Gas Spring

Using the DS springs is an excellent way to avoid unnecessary wear of the die, press and gas springs.

Low Contact Force Gas Spring - LCF

Low Contact Force – LCF

Brochure on our gas spring that reduces press maintenance, lowers noise levels, and increases production rates.

Stock Lifters - SLME, SLMT, SLM

Stock Lifters SLME 170, SLMT 170, SLM 300, SPC 800

KALLER Stocklifters SLME 170, SLMT 170 and SLM 300 gas springs are mainly for use in progressive dies. The extremely robust design can withstand high side loading.

SPC Gas springs

SPC Gas springs

KALLER Speed Control™ -SPC Gas Springs, these new springs have been engineered to reduce or eliminate blank holder bounce.

Soft-Hit Striker Plate - SSP

Soft-Hit Striker Plate – SSP

Soft-hit Striker Plate (SPP) have been engineered to address three of the major problems that face metal stampers: – Excessive shock loads – High noise levels – Poor part quality

Dual Post Lifters - DPL 90, DPL 200

Dual Post Lifters DPL 90, DPL 200

KALLER Dual Post Lifters, DPL 90 and DPL 200, can be used in progressive dies for lifting the stock when it progresses through the die.

Pressure Tank

Pressure Tank

Pressure Tanks are used together with the EO24-Hose system (or its equivalent) in applications where a low pressure/force build-up in the Hose System is advantageous (e.g. for deep draw tooling applications).

TON / Standard Parts

TON / Punches

TON / Punches

Punches, Button Dies, Pilots, Retainers by Toolingsystem

Slide & Guide parts

Guide Bush, Wear Plates etc.

LWP-SP/F, LWPT, LWPV, LGB-SP/F, LSB, LVP, LUP, LUPC, LTPV, LGP etc.

Guide Part

Guide Post, Guide Post Set etc.

Ball LPG, LPGP, LPGF, LPGW, LSG, LBGM, LBGF etc

Cam Unit

Cam Units

LHCG, LHCS, LHCC, LHCH, LICG, LICS, LICC, LICH, LFCG, LVCC etc.

Elements

Setting Key, Screw Plugs, Dowel Pins etc.

LSEM,  LDE, LKE, LKES, LPESL, LPESH etc.

Stock & Control Parts

Stripper Bolt, Spool Retainer, Retainer Pin etc.

LUT, LUTN, LPTS, LPTTB, LPTTS, LPTBB, LSTS, LBT, LBTT, LRTB, LATH etc.

Hook & Lift Parts

Hook Pin Set, Plate Hooks etc.

LHY, LPY, LPYL, LPYU, LSY, LSYL etc.

Locating & Checking Parts

Front Gauges, Rear Gauges etc.

LFA, LRA, LRAM, LRAV, LRAD, LSA,LSAS, LSAH, LSAK, LPAC etc.

Knock Out Pin

Panel Knock Out Pins etc.

LTOSA, LTOSB, LTOSC, LTOSD, LTOWA, LTOWB, LNOA, LNOB, LPOA etc.

Lifters

H-Type Lifter, Flange Lifter etc.

LHL, LHLM, LHLA, LHLB, LHLC, LHLD, LFLH, LFLS, LFLV, LFLFB etc.

Scrap Control Parts

Roller Guide Set, Roller Carrier Set etc.

LGRRA, LGRRC, LGRRD, LGRRE, LGRS, LGRSA, LLRR, LLRM, LLRB, LUR, LCR, LCRB etc.

Spring

Springs, Urethane Springs etc.

LSSF~Y, LUSWH, LUSR, LUSZ, LUSE etc.

Spring Units

Urethane Stoppers, Spring Guide Pin etc.

LUSTS, LUST, LPSF, LPSFD, LPSFC, LESS, LASB, LASM, LASMD etc.

Naams Parts

NAAMS Guide Bush, Wear Plate etc.

G50XXXX, G51XXXX, G61XXXX, G71XXXX, W01XXXX, W03XXXX etc.

LuBo 50H

50H Wear Plates, Thin Wear Plates

LWP-50H, LWPT-50H